3D MODEL DESCRIPTION
 

A chic multifunctional piece for holding small treasures or nurturing a plant.

Liked what you see? The models were designed by @simiu3D

• This STL file is recommended for FDM Printers!

• 3D Printing Time Based on Ender 3:  14  Hours 08 Minutes  (will vary accord to you printer model)

• Approximately Height: 13 cm
   

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

• Line Width/ Nozzle: 0.4 mm

• First Layer Line Width: 0.48 mm / 120%

• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)

• Recommended Initial Layer Height:  0.2 mm

• Recommended Layer Height:  0.2 mm

• Recommended Perimeters/ Walls: 3.

• Recommended Infill (%): 10% (Gyroid)

• Needs Support: No.

• Build Plate Adhesion: No.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.